HPI Micro RS4 99mm, fitting Losi Micro Rally bodies

Shorted chassis for HPI Micro RS4 in order to fit Losi Micro Rally bodies.

XMods Evo ASF

Here it is the best ever upgrade for an XMods: an ASF Ko Propo electronic board.

HOW TO:

"standard" XMods with some options.

Dismanteling the original electronic board and servo motor.

New cover plate designed and cut from a plastic credit card.

First look of the plate installed.

Mockup of everything on its place

Final installation

Cheers!

Kyosho MP-02

I present you a new front suspension for Kyosho MR-02 based on 1/12 pan cars and new MR-03 with variable dinamic camber and also variable static camber, you can move the ball end (MR-02 stock damper ball end) from the suspension brace (trimmed MR-02 stock knuckle :-))in order to increase or decrease the camber.

Enjoy it!

MyProto MZM

MP V4... again ;-)

I willl continue with this project that stands-by for one year :-)

I finally install some aluminium post to hold the tower bar and some plastic posts with aluminium clips to hold the battery tray.

On top of the battery tray i will install a 27AM Kyosho MR-02 ESC with an Futaba 3111 re-wired servo. Intellect batteries and Atomic cased Kyosho X-Speed will be the rest of the electronic equipment.

Stay tuned.

MR-02 94/96mm Cross Damper System

This is my personal vision of a "Cross Damper System" for Kyosho Mini-Z MR-015, MR-02 and MR-03 (i hope :-P) inspired in Team Associated RC12R5 and Inzane P28.

You can run 94mm wheelbase using PN 2294 and PN 2295 motor mounts, as well as 98 and 102mm set-up jut moving t-plate and upper suspension plate. If you use Reflex Racing t-plates you will be able to run also on 96, 100 or 104mm.

Very easy to install, without modifing anything, the system is composed of two different CF plates and two Kyosho dampers. It sits very low and is very light, the two plates are less than 2 grams.

I hope you like it ;-)

Lexan Wars. 1/24th chassis

New work in progress project.

1/24th scale roller chassis using aftermarket components like the knuckles support (from Iwaver 02M 3Racing) and the motor mount (Kyosho MR-02 LM)

Specs:

Width: +74mm

Wheelbase: 98-100-102-104-106-108-110mm

Weight : less than 200gr with lexan body, i hope :-)

Motor: 130 class

Batteries: 2/3AF